|
IMGA0581
Date: 03/18/2013
Views: 10706
|
|
|
IMGA0662
Date: 01/28/2015
Views: 32431
|
|
|
IMG_2224
Date: 05/27/2016
Views: 9842
|
|
|
IMGA0750
Made a tube of bid to carry the pitot tubes from one block to another. This block is where the bell crank sits and the push rod goes to the aileron.
Date: 05/05/2013
Views: 7768
|
|
|
IMGA0716
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Date: 04/23/2013
Views: 7438
|
|
|
IMGA0080
Date: 03/11/2015
Views: 12354
|
|
|
IMGA0062
Date: 09/27/2014
Views: 10473
|
|
|
IMGA0693
Date: 06/10/2015
Views: 34309
|
|
|
IMG_2342
Date: 06/14/2016
Views: 9867
|
|
|
IMAG0234
Date: 10/19/2012
Views: 7778
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7792
|
|
|
IMG_3032
Date: 09/30/2016
Views: 10437
|
|
|
IMGA0050
Most important.........Try to get the wife involved !!
Date: 11/13/2012
Views: 8028
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7701
|
|
|
IMGA0585
Date: 03/18/2013
Views: 11086
|
|
|
IMAG0260
Date: 11/30/2012
Views: 7795
|
|
|
IMAG0113
Date: 08/27/2012
Views: 5872
|
|
|
IMG_2335
Date: 06/14/2016
Views: 10172
|
|
|
IMGA0707
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Date: 04/21/2013
Views: 7609
|
|
|
IMGA0527
Date: 03/06/2013
Views: 6071
|
|