|
IMG_0167post
Date: 09/06/2010
Views: 2909
|
|
|
IMG_3374em
Run the engine, check the pressures. All seems OK. 5 lbs into the regulator and 3.8 lbs out of the regulator. This is with the Billet mechanical pump. Which became the next source of concern.
Date: 07/04/2012
Views: 3622
|
|
|
IMG_0092post
Date: 09/03/2010
Views: 2980
|
|
|
IMG_1714
Still working on fairings, cowl fit and some fixes.
Date: 05/24/2011
Views: 2675
|
|
|
IMG_1477p
started on the nose wheel and strut. Made brackets for the wheel pant.
Date: 06/08/2011
Views: 2949
|
|
|
IMG_1461p
Starboard wing outer flap bracket
Date: 06/05/2011
Views: 3204
|
|
|
New MC-4A 11
Because the sides are narrower and closer to the ends of the MC-4A's the old outer spacers no longer fit and it would be impossible to further shorten them, they have been replaced with a couple washers.
Date: 04/15/2012
Views: 5793
|
|
|
Wings on 3
Just had to get all the pitot/static lines and wing lighting wiring tucked into the wing root properly or they don't fit.
Date: 07/01/2011
Views: 3664
|
|
|
IMG_0175post
Date: 09/07/2010
Views: 2911
|
|
|
IMG_0247posta
Date: 09/28/2010
Views: 2910
|
|
|
IMG_1222ann
2011 03 18 Received my Poly-Flow brake line. It's more flexible than the other stuff. It can be routed to suit. All the brake system needs is the new reservoir and it can be filled/bled.
Date: 03/18/2011
Views: 3018
|
|
|
IMG_0025post
Date: 08/30/2010
Views: 4322
|
|
|
IMG_1364ann
2010 11 13 I began the fill/sand routine on the patched areas of the wing.
Date: 11/13/2010
Views: 2816
|
|
|
IMG_3238
Moved over to the port side and did the same with this carb.
Date: 05/21/2012
Views: 4314
|
|
|
IMG_0087post
Date: 09/02/2010
Views: 3526
|
|
|
IMG_0238post
Date: 09/11/2010
Views: 2506
|
|
|
IMG_1266ann
Blade ferrules have been torqued to 8 ft-lbs and the retention screw tightened with low-strength Loc-Tite.
Date: 03/28/2011
Views: 2956
|
|
|
IMG_1460p
Starboard wing tip
Date: 06/05/2011
Views: 3220
|
|
|
IMG_0262post
Aircraft loaded onto the trailer ready for the two-day trip from Brandon, Florida to Denton, Texas and the hanger at KDTO.
Date: 09/14/2010
Views: 2669
|
|
|
IMG_2755
New brake master cylinder set, installed and viewed from the tunnel. Brakes have been bled and seem to work well. Taxi testing will tell just how well they work.
Date: 04/24/2012
Views: 3464
|
|