|
IMGA0800
all that work then you have to cut a big chunk out!!
Date: 05/13/2013
Views: 7873
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 7346
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 7847
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 8335
|
|
|
IMGA0624
Date: 04/11/2013
Views: 8632
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 7265
|
|
|
IMGA0572
Date: 03/17/2013
Views: 9296
|
|
|
IMGA0820
Aileron closeout
Date: 05/15/2013
Views: 9849
|
|
|
IMGA0716
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Date: 04/23/2013
Views: 7335
|
|
|
IMGA0589
Date: 03/29/2013
Views: 11548
|
|
|
IMGA0878
Wing rib close outs
Date: 05/30/2013
Views: 8865
|
|
|
IMGA1259
Not bad looking for a classic wing if i do say so myself. Had to make a wing dolly for easier manoeuvrability round the shop.
Date: 09/23/2013
Views: 21493
|
|
|
IMGA0785
One side done. A straight edge is bonded on to aid rigidity once some of the foam is cut away
Date: 05/12/2013
Views: 8060
|
|
|
IMGA0620
Date: 04/09/2013
Views: 8573
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7667
|
|
|
IMGA0581
Date: 03/18/2013
Views: 10597
|
|
|
IMGA0756
Some dry micro to stick the block to the spar
Date: 05/05/2013
Views: 7251
|
|
|
IMGA0613
Date: 04/09/2013
Views: 12063
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7654
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 7413
|
|