|
IMGA0572
Date: 03/17/2013
Views: 8809
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 7456
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 7642
|
|
|
IMGA0756
Some dry micro to stick the block to the spar
Date: 05/05/2013
Views: 6788
|
|
|
IMGA0878
Wing rib close outs
Date: 05/30/2013
Views: 8296
|
|
|
IMGA0620
Date: 04/09/2013
Views: 8103
|
|
|
IMGA0800
all that work then you have to cut a big chunk out!!
Date: 05/13/2013
Views: 7386
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 7804
|
|
|
IMGA0811
Flap closeout
Date: 05/14/2013
Views: 9264
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7222
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 6862
|
|
|
IMGA0660
You can see the wash out build into the block
Date: 04/17/2013
Views: 6807
|
|
|
IMGA0581
Date: 03/18/2013
Views: 10084
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 6951
|
|
|
IMGA0573
Date: 03/17/2013
Views: 9780
|
|
|
IMGA0737
The small bloke with two mounting plates at the outrigger position.
Date: 04/26/2013
Views: 7148
|
|
|
IMGA0833
Remove trailing edge support ready for skin lay up
Date: 05/17/2013
Views: 8555
|
|
|
IMGA0770
Two are a time baby yeah!!!!!
Date: 05/10/2013
Views: 7346
|
|
|
IMGA0785
One side done. A straight edge is bonded on to aid rigidity once some of the foam is cut away
Date: 05/12/2013
Views: 7580
|
|
|
IMGA0626
Hole ready for stall warner
Date: 04/11/2013
Views: 7754
|
|