|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 10288
|
|
|
dsc09037
Making a template for rib 2. Do yourself a favor and do not use the templates in the manual you will end up waisting your plywood, just make your own.
Date: 01/23/2013
Views: 7908
|
|
|
dsc08633
We had to put the plane somewhat down near the trailer with the main up so that we could get the right contour for the ribs. Reminds me of a B-17 with the main just showing.
Date: 04/14/2012
Views: 6946
|
|
|
p1000706
p1000706.jpg
Date: 03/12/2012
Views: 5794
|
|
|
p1000722
p1000722.jpg
Date: 03/12/2012
Views: 6443
|
|
|
dsc09045
Uncle Kim at work. We would tilt to starboard to work on the port side vice versa.
Date: 01/23/2013
Views: 8505
|
|
|
dsc08962
Stb side. Need to do some clean up...
Date: 10/01/2012
Views: 10790
|
|
|
nex_2014_01_25_28
Wings on. Not really required at the stage. Just had to do it for motivation.
Date: 01/26/2014
Views: 6923
|
|
|
dsc08605
When I received the plane it had a few areas of this green tape. I guess it was going to be used as a release agent for some sort of jig fabrication. I have found that this 3M stuff works very well.
Date: 04/10/2012
Views: 11136
|
|
|
dsc08639
More of the same. I was going to cut the carpet and form it to the ribs and staple it in place but decided that was just a time vampire and pointless since the airframe is holding it in place.
Date: 04/15/2012
Views: 7281
|
|
|
p1000701
p1000701.jpg
Date: 03/12/2012
Views: 6001
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 15195
|
|
|
dsc08614
Anybody know a easy way to remove this rust?
Date: 04/10/2012
Views: 9364
|
|
|
p1000637
p1000637.jpg
Date: 02/14/2012
Views: 6234
|
|
|
photo (1)
Bad pic, but shows the end of the reinforcement layups (port side).
Date: 08/20/2012
Views: 11838
|
|
|
dsc08963
Port side. LG socket fitting.
Date: 10/01/2012
Views: 8940
|
|
|
dsc09051
Mix it up Kim! FYI I hate this scale from aircraft spruce, it times out in one min if your plugged in or not. I would have to tap the scale while Kim mixed. We were using masks due to being in an enclosed area and I'm very allergic to the hardener (bumm
Date: 01/24/2013
Views: 7822
|
|
|
dsc08606
Old mass balance arm.
Date: 04/10/2012
Views: 9399
|
|
|
dsc08620
Removal of the mono firewall.
Date: 04/14/2012
Views: 14653
|
|
|
p1000720
p1000720.jpg
Date: 03/12/2012
Views: 6659
|
|