|
dsc09030
Starboard side done.
Date: 01/22/2013
Views: 9429
|
|
|
photo (1)
Bad pic, but shows the end of the reinforcement layups (port side).
Date: 08/20/2012
Views: 13298
|
|
|
dsc08610
Whats missing?
Date: 04/10/2012
Views: 8908
|
|
|
nex_2013_08_24_04
As you see here the port side is done with rib 3 and 4. I didn't have photos of doing the layups.
Date: 08/25/2013
Views: 8161
|
|
|
p1000705
p1000705.jpg
Date: 03/12/2012
Views: 6235
|
|
|
dsc09041
Port side guides being placed for layup.
Date: 01/23/2013
Views: 9423
|
|
|
DSC08797
Port side
Date: 06/05/2012
Views: 10589
|
|
|
p1000722
p1000722.jpg
Date: 03/12/2012
Views: 6919
|
|
|
me_europa
Me in front of my Uncles Europa Classic late 90's in Borrego Springs, CA.
Date: 05/22/2012
Views: 11352
|
|
|
20160403_160443.jpg
20160403_160443.jpg
Date: 04/03/2016
Views: 14322
|
|
|
dsc08962
Stb side. Need to do some clean up...
Date: 10/01/2012
Views: 12304
|
|
|
dsc09056
Wetting out stbd side.
Date: 01/24/2013
Views: 8711
|
|
|
p1000715
p1000715.jpg
Date: 03/12/2012
Views: 6868
|
|
|
dsc09072
Here is a shot of the working angle. This was so much better than leaning over the edge. Kim's idea. Notice the heater behind Kim, this was key to keeping the temps even though the temps outside were in the 40's.
Date: 01/26/2013
Views: 9457
|
|
|
p1000724
p1000724.jpg
Date: 03/12/2012
Views: 7681
|
|
|
dsc08620
Removal of the mono firewall.
Date: 04/14/2012
Views: 18063
|
|
|
p1000628
p1000628.jpg
Date: 02/14/2012
Views: 7964
|
|
|
dsc09069
Rib 2 stbd side.
Date: 01/25/2013
Views: 9667
|
|
|
dsc09052
Wetting out stbd side.
Date: 01/24/2013
Views: 9497
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 10028
|
|