|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 9922
|
|
|
IMG_0412
Date: 04/17/2015
Views: 9485
|
|
|
IMG_0191[1]
Date: 09/12/2015
Views: 9201
|
|
|
GoPro1 002
Garden before
Date: 03/17/2014
Views: 13674
|
|
|
DSC00219
bracket installed
Date: 09/09/2015
Views: 10619
|
|
|
IMG_0414
Date: 04/18/2015
Views: 10563
|
|
|
IMG_0408
Date: 04/17/2015
Views: 9077
|
|
|
IMG_0823
Same of port side.
Date: 09/03/2015
Views: 7904
|
|
|
IMG_0231
Date: 01/31/2014
Views: 10081
|
|
|
DSC00214
blue foam placed in rudder to fill void
Date: 09/08/2015
Views: 10527
|
|
|
IMG_0340[1]
cloth cabinet installed.
Date: 09/04/2014
Views: 14335
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 8639
|
|
|
DSC00149
Winch installed in garage
Date: 09/01/2015
Views: 10722
|
|
|
IMG_0228
Andy & I having a good breakfast prior to the start of our trip to South Wales
Date: 01/31/2014
Views: 10226
|
|
|
IMG_0406
Date: 04/17/2015
Views: 9138
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 8911
|
|
|
DSC00155
As you can see the Issue 1 Bearings are considerably longer and will require shortening once I have the correct dimensions.
Date: 09/03/2015
Views: 8023
|
|
|
IMG_0417
Date: 04/22/2015
Views: 9497
|
|
|
Torque tube
Took some measurements and sent query to Europa. Response was I required the issue 1 TP38s
Date: 09/03/2015
Views: 5770
|
|
|
IMG_0410
Date: 04/17/2015
Views: 10978
|
|