|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7688
|
|
|
IMG_3043
Date: 09/30/2016
Views: 10716
|
|
|
IMGA0693
Date: 06/10/2015
Views: 33764
|
|
|
IMGA0214
Date: 05/10/2015
Views: 9228
|
|
|
IMGA0620
Date: 04/09/2013
Views: 8585
|
|
|
IMGA0906
Date: 10/12/2016
Views: 98348
|
|
|
IMG_2341
Date: 06/14/2016
Views: 10417
|
|
|
IMGA0756
Some dry micro to stick the block to the spar
Date: 05/05/2013
Views: 7256
|
|
|
IMG_3196
Date: 11/02/2016
Views: 11991
|
|
|
IMGA0160
Date: 04/22/2015
Views: 9457
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7608
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 7431
|
|
|
IMGA0210
Date: 05/09/2015
Views: 9149
|
|
|
IMGA0300
Date: 06/10/2015
Views: 9097
|
|
|
IMAG0239
Date: 10/19/2012
Views: 8154
|
|
|
IMGA0573
Date: 03/17/2013
Views: 10317
|
|
|
IMGA0707
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Date: 04/21/2013
Views: 7521
|
|
|
IMG_3156
Date: 06/14/2018
Views: 13713
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 8348
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 7853
|
|