|
Intercooler05
Date: 01/07/2006
Views: 4053
|
|
|
IntercoolerPg1
Date: 01/07/2006
Views: 4087
|
|
|
IMG_2857
Date: 12/03/2008
Views: 3510
|
|
|
IMG_6789small
Date: 02/23/2008
Views: 3591
|
|
|
DSCN6127Ann
Date: 06/14/2007
Views: 3073
|
|
|
DSCN6112Ann
Date: 06/13/2007
Views: 3144
|
|
|
IMG_0044post
So it's back to bleeding the brakes again. Pull the lines out so there's no high spots and there's an "all up" run to the master cylinder. Connect the bleed contraption and wait.
Date: 07/08/2010
Views: 3662
|
|
|
IMG_6792post
Width and thickness of the tail wheel "U" channel
Date: 12/10/2009
Views: 3356
|
|
|
IMG_1087ann
Then problem #2 - bolts that held the cover plate in place wouldn't fit into the space provided on the pump.
Date: 04/03/2010
Views: 3727
|
|
|
IMG_0918post
Some pics after the engine run-up and taxi tests today.
Date: 07/01/2010
Views: 3833
|
|
|
IMG_9562ann
2010 06 06 - Made up an adaptor that fits the bleed and doesn't leak. Began to run fluid into the system. Went up to the master cylinder/reservoir to check on progress. Was I getting bubbles through the bit of fluid it put in back on the 3rd?
Date: 06/06/2010
Views: 3071
|
|
|
DSCN6098Ann
Date: 06/13/2007
Views: 3347
|
|
|
IntercoolerKit01
Date: 12/08/2004
Views: 4524
|
|
|
IMG_2854
Date: 12/03/2008
Views: 3335
|
|
|
IMG_1238ann
The vent port was reversed from the original regulator. This one points forward. Had to do some tugging on tubing to get it all arranged. As soon as I have my new brake caliper installed and tested, I'll be ready to start testing the engine.
Date: 06/21/2010
Views: 3507
|
|
|
IMG_9570ann
2010 06 12 - Completed the plumbing for the new mechanical fuel pump this morning. Fire shield on all fuel lines. Everything connected in the proper sequence.
Date: 06/12/2010
Views: 3566
|
|
|
DSCN6106Ann
Date: 06/13/2007
Views: 3518
|
|
|
2ndAlternator04small
Date: 04/04/2005
Views: 3825
|
|
|
P4141326
Date: 04/16/2006
Views: 4103
|
|
|
LongRangeTankStbd
Date: 07/31/2004
Views: 4239
|
|