|
DSC00229
Still some work to do but happy so far.
Date: 09/10/2015
Views: 13898
|
|
|
IMG_0229
At Steve's workshop packing the kit ready for transportation
Date: 01/31/2014
Views: 9740
|
|
|
Rivets
Next problem. Once the push rod end was fitted and drilled according to the manual the rivets provided were too short to go through the whole structure. Awaiting a response from Europa
Date: 09/03/2015
Views: 9261
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 9047
|
|
|
IMG_0410
Date: 04/17/2015
Views: 11191
|
|
|
IMG_0231
Date: 01/31/2014
Views: 10297
|
|
|
IMG_0408
Date: 04/17/2015
Views: 9300
|
|
|
Ipad 039
Concrete base for 20ft x 10ft shed
Date: 03/22/2014
Views: 8436
|
|
|
IMG_0190[1]
Date: 04/13/2014
Views: 11754
|
|
|
Ipad 044
Shed Complete
Date: 04/13/2014
Views: 9561
|
|
|
DSC00219
bracket installed
Date: 09/09/2015
Views: 11185
|
|
|
IMG_0189[1]
Date: 04/13/2014
Views: 12614
|
|
|
IMG_0279
Insulation going in
Date: 04/02/2014
Views: 11194
|
|
|
IMG_0230
Date: 01/31/2014
Views: 9737
|
|
|
DSC00214
blue foam placed in rudder to fill void
Date: 09/08/2015
Views: 11021
|
|
|
DSC00155
As you can see the Issue 1 Bearings are considerably longer and will require shortening once I have the correct dimensions.
Date: 09/03/2015
Views: 8244
|
|
|
IMG_0417
Date: 04/22/2015
Views: 9765
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 9345
|
|
|
DSC00160
Foam removed from rear bulk head ready for plywood inserts
Date: 09/03/2015
Views: 10743
|
|
|
IMG_0823
Same of port side.
Date: 09/03/2015
Views: 8118
|
|