|
IMG_2688
Cut away excess material on the sides of the angle. Will probably cut away more excess material from the base part of the angle.
Date: 04/09/2012
Views: 3475
|
|
|
IMG_0135post
Date: 09/03/2010
Views: 2837
|
|
|
IMG_1478p
Other side...
Date: 06/08/2011
Views: 2907
|
|
|
IMG_0143post
Date: 09/04/2010
Views: 2650
|
|
|
IMG_0082post
Date: 09/02/2010
Views: 2717
|
|
|
Flap Mark Up
So it was time to commit to sticking the real markings to the flap. Flap up...
Date: 07/01/2011
Views: 3658
|
|
|
IMG_1690
Working on nose gear as well.
Date: 05/10/2011
Views: 3426
|
|
|
IMG_0140post
Date: 09/04/2010
Views: 2809
|
|
|
IMG_0092post
Date: 09/03/2010
Views: 2982
|
|
|
IMG_2604
Got out the inspection mirror and made sure the gasket was in place all the way round the bowl. It was.
Date: 05/30/2012
Views: 5199
|
|
|
IMG_0130post
Date: 09/03/2010
Views: 2703
|
|
|
IMG_0034post
Date: 09/01/2010
Views: 3636
|
|
|
IMG_0139post
Date: 09/03/2010
Views: 2586
|
|
|
IMG_1496p
Rudder
Date: 06/18/2011
Views: 2861
|
|
|
IMG_0191ann
Date: 09/08/2010
Views: 2524
|
|
|
IMG_0248post
Date: 09/14/2010
Views: 3560
|
|
|
IMG_1459p
Work continued on the priming/sanding of the repaired areas like the port wing outer flap bracket
Date: 06/05/2011
Views: 2789
|
|
|
IMG_1277ann
The starboard wheel pant marked with tape to show where to cut.
Date: 03/29/2011
Views: 3351
|
|
|
IMG_0112post
Date: 09/03/2010
Views: 2883
|
|
|
IMG_1284ann
Cut a piece of aluminum for the console cover. Laid out the pattern on the aluminum sheet and traced around it.
Date: 03/30/2011
Views: 2896
|
|