|
3_snaps
The original snap base hardware is on the right. The new snap bases and mounting hardware are on the left. These 6-32 screw mount snap bases are from McMaster-Carr. I used big ol' AN970 washers for more support underneath and nyloc nuts so they don't c
Date: 06/23/2011
Views: 4093
|
|
|
IMG_6783small
Date: 02/23/2008
Views: 3186
|
|
|
IMG_0036
2010 07 07 - Back to retraction tests. Thought that the fixtures sticking up off the caliper might be a problem. Replaced them with the 90 degree fitting and a straight hose end. Much neater and more compact, but I'll have to bleed the brakes again whe
Date: 07/07/2010
Views: 3709
|
|
|
Ufront
Date: 04/16/2006
Views: 4011
|
|
|
LongRangeTankIns
Date: 07/31/2004
Views: 4323
|
|
|
IMG_6975post
Overall length of ramp
Date: 12/27/2009
Views: 3331
|
|
|
IMG_2854
Date: 12/03/2008
Views: 3262
|
|
|
DSCN6109Ann
Date: 06/13/2007
Views: 3387
|
|
|
Intercooler03
Date: 01/07/2006
Views: 3492
|
|
|
IMG_2856
Date: 12/03/2008
Views: 3606
|
|
|
DSCN6123Ann
Date: 06/14/2007
Views: 2972
|
|
|
IMG_7430post
This is the way the new fuel pump and fuel pressure regulator arrived.
Date: 03/15/2010
Views: 4446
|
|
|
DSCN6116Ann
Date: 06/14/2007
Views: 3147
|
|
|
2ndAlternator01small
Date: 03/31/2005
Views: 4042
|
|
|
IMG_1233ann
Went home and pulled a brake caliper off my Little Toot project. Brought it out to the hanger and the darn thing fits. So I have ordered a single puck version of the same brake caliper. When it arrives, it will go on and I'll replace the banjo hose end
Date: 06/21/2010
Views: 3022
|
|
|
2_Door_Knobs
They work well without any protruding or scratch making lumps or bumps.
Date: 06/23/2011
Views: 3761
|
|
|
IMG_7432post
The fuel pump is supposed to be capable of 100 GPH @ 50 PSI. The fuel pressure regulator will drop that to 10 PSI for the existing Rotax fuel pressure regulator.
Date: 03/15/2010
Views: 3515
|
|
|
DSCN6111Ann
Date: 06/13/2007
Views: 3276
|
|
|
IMG_0045post
Put a bit of fluid in the reservoir and observe bubbles. Air is being pushed out and replaced by fluid. That's good. Watched this for almost an hour till the bubbles stopped and the reservoir began to fill. Shut the bleed contraption, stuff the line b
Date: 07/08/2010
Views: 3926
|
|
|
4_snaps
Here is a picture of the original snap bases still on the passenger head rest along with one of the new screw snap bases.
Date: 06/23/2011
Views: 4323
|
|