|
|
IMGA0571
Date: 03/17/2013
Views: 254098
|
|
|
IMGA1259
Not bad looking for a classic wing if i do say so myself. Had to make a wing dolly for easier manoeuvrability round the shop.
Date: 09/23/2013
Views: 252511
|
|
|
|
IMGA0344
First idea's
Date: 04/26/2014
Views: 183218
|
|
|
IMGA0952
Finally done. 6 months start to finish
Date: 09/11/2017
Views: 175213
|
|
|
|
IMGA0906
Date: 10/12/2016
Views: 169288
|
|
|
IMGA0022
Date: 09/18/2014
Views: 131019
|
|
|
|
IMGA0662
Date: 01/28/2015
Views: 129971
|
|
|
Graphics
Looking good
Date: 10/27/2017
Views: 125070
|
|
|
|
IMGA0854
Date: 08/20/2016
Views: 122080
|
|
|
IMGA0862
Date: 08/21/2016
Views: 117266
|
|
|
|
IMGA0693
Date: 06/10/2015
Views: 112204
|
|
|
IMGA0872
Date: 08/27/2016
Views: 111879
|
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 106069
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 105610
|
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 103703
|
|
|
IMGA0613
Date: 04/09/2013
Views: 103560
|
|
|
|
IMGA0702
Date: 06/13/2015
Views: 102167
|
|
|
IMGA0737
The small bloke with two mounting plates at the outrigger position.
Date: 04/26/2013
Views: 100062
|
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 98905
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 97908
|
|
