|
|
IMGA0331
Date: 10/03/2015
Views: 32706
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 113088
|
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 111675
|
|
|
IMGA0854
Date: 08/20/2016
Views: 135943
|
|
|
|
IMGA0660
You can see the wash out build into the block
Date: 04/17/2013
Views: 92143
|
|
|
IMGA0303
Date: 06/11/2015
Views: 30149
|
|
|
|
IMG_3173
Date: 06/14/2018
Views: 51370
|
|
|
IMGA0081
Date: 11/20/2012
Views: 47878
|
|
|
|
IMG_2335
Date: 06/14/2016
Views: 33678
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 104485
|
|
|
|
IMGA0308
Date: 06/11/2015
Views: 31832
|
|
|
IMGA0750
Made a tube of bid to carry the pitot tubes from one block to another. This block is where the bell crank sits and the push rod goes to the aileron.
Date: 05/05/2013
Views: 93090
|
|
|
|
IMG_2224
Date: 05/27/2016
Views: 34689
|
|
|
IMG_2211
Date: 05/27/2016
Views: 30851
|
|
|
|
IMGA0118
Date: 04/02/2015
Views: 35816
|
|
|
IMAG0234
Date: 10/19/2012
Views: 21639
|
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 93227
|
|
|
IMGA0609
Date: 06/28/2014
Views: 99563
|
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 113776
|
|
|
IMGA0626
Hole ready for stall warner
Date: 04/11/2013
Views: 72334
|
|
