|
|
IMGA0623
Date: 04/09/2013
Views: 69925
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 96432
|
|
|
|
IMGA0624
Date: 04/11/2013
Views: 68622
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 81165
|
|
|
|
IMGA0820
Aileron closeout
Date: 05/15/2013
Views: 88433
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 97545
|
|
|
|
IMGA0785
One side done. A straight edge is bonded on to aid rigidity once some of the foam is cut away
Date: 05/12/2013
Views: 71164
|
|
|
IMGA0770
Two are a time baby yeah!!!!!
Date: 05/10/2013
Views: 72819
|
|
|
|
IMGA0572
Date: 03/17/2013
Views: 74929
|
|
|
IMGA0811
Flap closeout
Date: 05/14/2013
Views: 91708
|
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 86733
|
|
|
IMGA0833
Remove trailing edge support ready for skin lay up
Date: 05/17/2013
Views: 84451
|
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 102215
|
|
|
IMGA0573
Date: 03/17/2013
Views: 84313
|
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 100146
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 77966
|
|
|
|
IMGA0571
Date: 03/17/2013
Views: 236904
|
|
|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 68303
|
|
|
|
IMGA0754
These straps are great, one down one to go
Date: 05/05/2013
Views: 82109
|
|
|
IMGA0660
You can see the wash out build into the block
Date: 04/17/2013
Views: 84499
|
|
