|
|
5_snaps
The new snap bases installed in the head rest.
Date: 06/23/2011
Views: 7280
|
|
|
IMG_7430post
This is the way the new fuel pump and fuel pressure regulator arrived.
Date: 03/15/2010
Views: 7276
|
|
|
|
4_snaps
Here is a picture of the original snap bases still on the passenger head rest along with one of the new screw snap bases.
Date: 06/23/2011
Views: 7235
|
|
|
IntercoolerFig3
Date: 01/07/2006
Views: 7189
|
|
|
|
3_snaps
The original snap base hardware is on the right. The new snap bases and mounting hardware are on the left. These 6-32 screw mount snap bases are from McMaster-Carr. I used big ol' AN970 washers for more support underneath and nyloc nuts so they don't c
Date: 06/23/2011
Views: 7135
|
|
|
6_snaps
Seat cushions installed and snapped into place.
Date: 06/23/2011
Views: 7128
|
|
|
|
Intercooler05
Date: 01/07/2006
Views: 7106
|
|
|
IntercoolerFig1
Date: 01/07/2006
Views: 7088
|
|
|
|
IMG_0918post
Some pics after the engine run-up and taxi tests today.
Date: 07/01/2010
Views: 7071
|
|
|
IMG_0916post
Safety wired the bolts and check the installation. Pushed the aircraft and the brake stopped it. Held the brake and tried to push it aircraft. It wouldn't budge. Very good. Pulled it out of the hanger, started it up, let it warm properly and taxi tes
Date: 07/01/2010
Views: 7036
|
|
|
|
Intercooler07
Date: 01/07/2006
Views: 7017
|
|
|
IntercoolerPg1
Date: 01/07/2006
Views: 6991
|
|
|
|
IMG_6702Ann
Date: 02/15/2008
Views: 6982
|
|
|
IMG_6686Ann
Date: 02/15/2008
Views: 6910
|
|
|
|
Intercooler08
Date: 01/07/2006
Views: 6882
|
|
|
InsideOpen
Date: 07/09/2003
Views: 6873
|
|
|
|
LongRangeTankBits
Date: 07/31/2004
Views: 6862
|
|
|
IMG_7432post
The fuel pump is supposed to be capable of 100 GPH @ 50 PSI. The fuel pressure regulator will drop that to 10 PSI for the existing Rotax fuel pressure regulator.
Date: 03/15/2010
Views: 6860
|
|
|
|
IMG_6687Ann
Date: 02/15/2008
Views: 6853
|
|
|
Plexi02small
Date: 04/04/2005
Views: 6846
|
|
