|
IMG_1578ann
2011 03 11 Installation of the parking brake valve completed and the brake lines attached. Hard to believe that took all day...
Date: 03/11/2011
Views: 2453
|
|
|
IMG_0923ann
2011 03 02 Darn cold winter this year. Start to fit the last piece of baffle back in place. Needless to say, it's fighting back.
Date: 03/02/2011
Views: 2575
|
|
|
IMG_0924ann
Seems like these are the correct holes for the new Riv-Nuts. I hope so anyway.
Date: 03/02/2011
Views: 4295
|
|
|
IMG_0925ann
Fill/sand continues on the wheel pants
Date: 03/02/2011
Views: 3346
|
|
|
IMG_0926ann
Fill/sand on the nose wheel fairing
Date: 03/02/2011
Views: 2466
|
|
|
IMG_0927ann
And fill/sand continues on the wing repair areas.
Date: 03/02/2011
Views: 2573
|
|
|
IMG_1501post
Need to keep things out of the way.
Date: 02/18/2011
Views: 2813
|
|
|
IMG_1503ann
Made up a template for cover for the console. It has been pretty chewed up with removal of some stuff and installation of new stuff.
Date: 02/18/2011
Views: 2810
|
|
|
IMG_1499ann
2011 02 18 Weather remains cold overall. Today was nice though. Mounted a number of new cable tie mounts to hold wires, etc.
Date: 02/18/2011
Views: 2895
|
|
|
IMG_1470ann
2011 01 26 January proves to be as cold and nasty as December. Finally have a day to work. Start by aligning the new outer flap brackets to make ready for mounting.
Date: 01/26/2011
Views: 2718
|
|
|
IMG_1471ann
2011 01 27 One final check of alignment before drilling.
Date: 01/27/2011
Views: 2993
|
|
|
IMG_0822ann
Set to drilling and bolting the new outer brackets in place.
Date: 01/27/2011
Views: 3111
|
|
|
IMG_0823ann
the other flap bracket.
Date: 01/27/2011
Views: 3088
|
|
|
IMG_0824ann
Somewhere along the way, a couple spacers had been lost. Made up new ones. Also put anchor nuts on the radiator mounting flanges to make assembly easier, sorta, kinda. Seems like reassembling this aircraft is more difficult than the original building.
Date: 01/27/2011
Views: 3178
|
|
|
IMG_1426ann
2010 12 21 - Taking advantage of a couple days of nice weather. Installed the cooling duct and heat exchangers.
Date: 12/21/2010
Views: 3055
|
|
|
IMG_1431ann
Continuing work on the fill/sand
Date: 12/21/2010
Views: 3466
|
|
|
IMG_1593ann
Installed the master cylinder and parking brake and began connecting brake lines.
Date: 03/16/2011
Views: 3505
|
|
|
IMG_1595ann
Test fit of the intercooler.
Date: 03/16/2011
Views: 3081
|
|
|
IMG_1423ann
Ran the left and right brake line up through the tunnel.
Date: 12/20/2010
Views: 3312
|
|
|
IMG_1418ann
I had also been working on a stainless steel cover/mount which attaches to the lower firewall and will support the front edge of the monowheel hole cover.
Date: 12/20/2010
Views: 3166
|
|