Found many voids and bad areas of layups on doors.
Date: 08/24/2009
Views: 4970
IMG_3398
Date: 10/24/2010
Views: 3470
Antenna holder/stengthening tube install begins.
Date: 01/20/2010
Views: 2940
Newest Image
EAA SITE
Date: 08/23/2023
Views: 106079
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 537556
IM002671
A few pointers on Andair 375:
*Isopropynal removes witness alignment marks for proper registration of bowls just as well as it will remove markings on some rulers
*On our model 375, the inlet and outlets are 1/4" NPT threads. The female threads are machined in a square block of aluminium and held in place with 4 flat head screws and sealed with an O-ring. The 4 screws pattern allows the block to be best positioned in case you are using other than a straight fitting (ie 45 or 90 degree). Once you proper orient, there is a dimple in the gasculator that wants you to stake (can use a punch) edge of flat head screws into the dimple to lock screw in place.
Y9-10-25