|
|
Results of fitting in situation.
Date: 11/27/2013
Views: 7965
|
|
|
Self Etching Primed
Date: 11/28/2013
Views: 7320
|
|
|
|
Oops, fixed a dent I made with a C-Clamp when testing spar Adel clamp bracket, Q-Cel, 1 BID and Peel-Ply
Date: 11/30/2013
Views: 8526
|
|
|
I failed a bearing on purpose
Date: 11/27/2013
Views: 14884
|
|
|
|
Flap extension 10
Date: 11/06/2013
Views: 8323
|
|
|
Flap Upstops 7 of 7
Date: 12/25/2013
Views: 9604
|
|
|
|
Eric Engineering bending moment of tube with bends
Date: 12/03/2013
Views: 8349
|
|
|
Emergency Maneuver that starts with Heim? 13 of 13
Date: 12/16/2013
Views: 8121
|
|
|
|
Flap drive pin install 7.
Date: 11/30/2010
Views: 10709
|
|
|
Eric Engineering increase in force needed when cable is deflected 2
Date: 12/03/2013
Views: 7543
|
|
|
|
Emergency Maneuver that starts with Heim? 7 of 13
Date: 12/16/2013
Views: 8063
|
|
|
You can see I left a little space so the spacer can pinch the bearing when the nut is tightened
Date: 12/13/2013
Views: 7031
|
|
|
|
Second pass 2
Date: 08/03/2013
Views: 11918
|
|
|
Kingsley 3 Latch Arm with makeshift spring.
Date: 09/04/2005
Views: 7040
|
|
|
|
Cut down 1" aft threaded rod to .700"
Date: 12/13/2013
Views: 7738
|
|
|
Mill round slot in master cylinder 7 of 12
Date: 12/23/2013
Views: 8415
|
|
|
|
Aux tank installed to show starboard flap upstop clearance
Date: 10/08/2013
Views: 6557
|
|
|
Kingsley 2 19mm Sealed bearing on side of suspension trailing arm.
Date: 09/04/2005
Views: 7137
|
|
|
|
1/2" clamps that allow cable to slide 1 of 2
Date: 12/16/2013
Views: 9075
|
|
|
Trying not to mar flap cross tube too bad with Upstops 2 of 7
Date: 12/26/2013
Views: 10233
|
|
