|
|
nex_2013_08_24_02
nex_2013_08_24_02.jpg
Date: 08/25/2013
Views: 16965
|
|
|
nex_2013_08_24_03
nex_2013_08_24_03.jpg
Date: 08/25/2013
Views: 16675
|
|
|
|
nex_2013_08_24_04
As you see here the port side is done with rib 3 and 4. I didn't have photos of doing the layups.
Date: 08/25/2013
Views: 17309
|
|
|
dsc09068
Seeing how ribs 2,3,4 line up. Get a belt sander 4x36, you'll be glad you did. Mine is from Harbor Freight.
Date: 01/25/2013
Views: 19576
|
|
|
|
dsc09069
Rib 2 stbd side.
Date: 01/25/2013
Views: 18343
|
|
|
dsc09070
While the layups are curing we stared work on the axles. Had to ream out the holes forMG02.
Date: 01/25/2013
Views: 19301
|
|
|
|
dsc09071
Uncle Kim glassing in Rib 2.
Date: 01/26/2013
Views: 18950
|
|
|
dsc09072
Here is a shot of the working angle. This was so much better than leaning over the edge. Kim's idea. Notice the heater behind Kim, this was key to keeping the temps even though the temps outside were in the 40's.
Date: 01/26/2013
Views: 19583
|
|
|
|
dsc09073
Rib 2 template.
Date: 01/26/2013
Views: 18567
|
|
|
dsc09074
Port side Rib 2 layup.
Date: 01/26/2013
Views: 18514
|
|
|
|
dsc09075
Stbd side after cure. We died the uni in with rib 1.
Date: 01/26/2013
Views: 18352
|
|
|
dsc09076
Bottom layup of the port side.
Date: 01/26/2013
Views: 18542
|
|
|
|
dsc09054
Wetting out stbd side.
Date: 01/24/2013
Views: 17797
|
|
|
dsc09055
Wetting out stbd side.
Date: 01/24/2013
Views: 17960
|
|
|
|
dsc09056
Wetting out stbd side.
Date: 01/24/2013
Views: 17252
|
|
|
dsc09057
Wetting out stbd side.
Date: 01/24/2013
Views: 17491
|
|
|
|
dsc09058
Wetting out stbd side.
Date: 01/24/2013
Views: 17558
|
|
|
dsc09060
Wetting out stbd side.
Date: 01/24/2013
Views: 17661
|
|
|
|
dsc09061
Applying the layups on stbd side.
Date: 01/24/2013
Views: 17457
|
|
|
dsc09062
Bill applying peel ply!
Date: 01/24/2013
Views: 17823
|
|
