Login
EuropaOwners
Europa Classic
Wings
Advanced Search
Europa Classic
1. Workshop
2. Powder Coating
3. Ailerons
4. Tail Planes
5. Wings
6. Finishing
7. Instrument ...
Random Images
IMGA1259
Date: 09/23/2013
Views: 19485
IMGA0770
Date: 05/10/2013
Views: 7141
IMGA0833
Date: 05/17/2013
Views: 8301
Newest Image
IMGA1259
Date: 09/23/2013
Views: 19485
Items Currently in Your Cart
« cart actions »
Update Quantities
Empty Cart
Download in Zip
Quantity
Item
Type
Remove
Title:
IMGA0571
Summary:
Photo
Title:
IMGA0572
Summary:
Photo
Title:
IMGA0573
Summary:
Photo
Title:
IMGA0581
Summary:
Photo
Title:
IMGA0585
Summary:
Photo
Title:
IMGA0589
Summary:
Photo
Title:
IMGA0613
Summary:
Photo
Title:
IMGA0620
Summary:
Photo
Title:
IMGA0623
Summary:
Photo
Title:
IMGA0624
Summary:
Photo
Title:
IMGA0626
Summary:
Hole ready for stall warner
Photo
Title:
IMGA0634
Summary:
Shimmed for correct washout
Photo
Title:
IMGA0635
Summary:
Rib ready for floxing
Photo
Title:
IMGA0641
Summary:
EXOTHERM!! My worst moment yet
Photo
Title:
IMGA0657
Summary:
After repair
Photo
Title:
IMGA0661
Summary:
Screws through ribs to align blocks.....must remember to remove them before the lay up
Photo
Title:
IMGA0660
Summary:
You can see the wash out build into the block
Photo
Title:
IMGA0664
Summary:
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Photo
Title:
IMGA0673
Summary:
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Photo
Title:
IMGA0680
Summary:
These are the rear blocks where the bell cranks sit in. Note the vent holes
Photo
Title:
IMGA0732
Summary:
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Photo
Title:
IMGA0737
Summary:
The small bloke with two mounting plates at the outrigger position.
Photo
Title:
IMGA0701
Summary:
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Photo
Title:
IMGA0707
Summary:
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Photo
Title:
IMGA0712
Summary:
Made some stands and a reference plate which is at 90 degrees to the spar
Photo
Title:
IMGA0716
Summary:
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Photo
Title:
IMGA0722
Summary:
Just testing out the rear blocks for an idea what it will look like
Photo
Title:
IMGA0750
Summary:
Made a tube of bid to carry the pitot tubes from one block to another. This block is where the bell crank sits and the push rod goes to the aileron.
Photo
Title:
IMGA0756
Summary:
Some dry micro to stick the block to the spar
Photo
Title:
IMGA0754
Summary:
These straps are great, one down one to go
Photo
Title:
IMGA0770
Summary:
Two are a time baby yeah!!!!!
Photo
Title:
IMGA0785
Summary:
One side done. A straight edge is bonded on to aid rigidity once some of the foam is cut away
Photo
Title:
IMGA0800
Summary:
all that work then you have to cut a big chunk out!!
Photo
Title:
IMGA0811
Summary:
Flap closeout
Photo
Title:
IMGA0820
Summary:
Aileron closeout
Photo
Title:
IMGA0833
Summary:
Remove trailing edge support ready for skin lay up
Photo
Title:
IMGA0878
Summary:
Wing rib close outs
Photo
Title:
IMGA1030
Summary:
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Photo
Title:
IMGA1057
Summary:
And a few hours later.......
Photo
Title:
IMGA1259
Summary:
Not bad looking for a classic wing if i do say so myself. Had to make a wing dolly for easier manoeuvrability round the shop.
Photo