Rigging descision 2.5 Starboard, 2.4 Port and droop port flap .110 at root 2.
Date: 10/25/2010
Views: 3073
Allow 3mm glass to recess a little further.
Date: 06/26/2009
Views: 4922
Newest Image
EAA SITE
Date: 08/23/2023
Views: 150704
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 554553
Took a night to make 2 holes.
Took all night to make 2 holes. Needed to work back and forth between front and aft, using long tapered files if needed to steer hole. Would file in direction of desire, then spin file CCW to make hole again round. If hole was OK located, would use a Unibit step drill to go to next size.
You can see here hole is almost there, need to move hole just slightly down, (see the scrape of Prussian blue).
Y9-10-09