Kingsley 4 Undercarriage latched up viewed from below.
Date: 09/04/2005
Views: 4080
Brackets are mounted. Wayne is about half way done with PCB.
Date: 07/15/2010
Views: 3011
Newest Image
EAA SITE
Date: 08/23/2023
Views: 90408
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 534212
Dolly 13
I needed to remove some material from the top of the jack to allow pivots to fit.
I can't remember if I used a band-saw, hacksaw or both.
Then used a 3" round air sander and file to finish up.
If you look close you can see the Black Enamel line on the top, the damaged paint on the bottom is caused when the jack is collapsed.