Front Starboard fuse stiffening for lift socket 10.
Date: 10/24/2010
Views: 2856
Port wingskin fill begins 1.
Date: 09/14/2010
Views: 2830
Newest Image
EAA SITE
Date: 08/23/2023
Views: 87951
Stick grip 6
Detail of connection. #26 wires doubled over and crimped to machined male D-sub pin. D-sub gets heat shrink over wire for strain relief. D-sub gets crimped to Radio Shack 9 pin Molex connector after the insulation crimp is cut off, then D-sub is soldered to Molex pin. There is no solder on #26 wire to make it stiff.
Y9-03-23