CG evaluation will likely be needed after we complete wiring!
Date: 03/18/2009
Views: 2902
IMG_5901post
Date: 08/09/2009
Views: 2648
IMG_1420
Date: 05/31/2011
Views: 2741
Newest Image
EAA SITE
Date: 08/23/2023
Views: 86109
WingSet69
Finally, we measured the wing sweep. I do that by measuring from the point where the spar meets the wing tip cap back to the end of the horizontal stab torque tube. It should be the same for both sides. 176 7/8" on the port side and 176 7/8" on the starboard side. That's about as close as it gets. Cleaned up the tools and stuff and left it all to cure overnight.