First ply being held flat, then a bit of heat added.
Date: 01/11/2010
Views: 3103
IMG_0248post
Date: 09/14/2010
Views: 3245
Newest Image
EAA SITE
Date: 08/23/2023
Views: 99012
IMG_1412
Another issue with the pre-built cockpit module. The fuel tank was not supported on the aluminum angle. Bud suggested this could cause tank cracking and recommended some sort of support be added. I cut a wedge from a length of balsa and covered it with glass. It was then bonded in place with Araldite/FLOX. The tanks now appears to be supported.