|
|
IMG_1238ann
The vent port was reversed from the original regulator. This one points forward. Had to do some tugging on tubing to get it all arranged. As soon as I have my new brake caliper installed and tested, I'll be ready to start testing the engine.
Date: 06/21/2010
Views: 5851
|
|
|
06022010409
Date: 02/06/2010
Views: 8042
|
|
|
|
CH18_09
Date: 12/31/1969
Views: 4850
|
|
|
3_Wire_conduit
Date: 10/29/2007
Views: 6326
|
|
|
|
DSCF0044
Date: 03/02/2009
Views: 5803
|
|
|
Web_Site_17
Date: 03/25/2004
Views: 5829
|
|
|
|
DSCN4792Ann
Date: 10/22/2006
Views: 6511
|
|
|
DSCN5516Ann
Date: 02/09/2007
Views: 5234
|
|
|
|
Rotax_oil_line_1
Date: 03/24/2009
Views: 6762
|
|
|
40_G
Date: 06/19/2009
Views: 4562
|
|
|
|
03072003100535_G
Date: 12/31/1969
Views: 4479
|
|
|
DSCN5292Ann
Date: 12/21/2006
Views: 4331
|
|
|
|
IMG_2313
Panel plates were cut from aluminum and fitted to the fiberglass.
Date: 10/06/2011
Views: 7673
|
|
|
64_3_Fuel
Date: 12/31/1969
Views: 4247
|
|
|
|
IMG_8243Ann
Date: 07/21/2008
Views: 4177
|
|
|
Running and connecting "Fat" wires 7.
Date: 01/05/2011
Views: 8360
|
|
|
|
Elba LIRJ from 3000ft
Date: 06/07/2012
Views: 88623
|
|
|
Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 5007
|
|
|
|
Fill fuse 2.
Date: 05/22/2009
Views: 5031
|
|
|
Making awful fit of lift pads correct 25.
Date: 10/14/2010
Views: 6843
|
|
