|
|
Lower door anti-bulge 1.
Date: 12/01/2009
Views: 4850
|
|
|
IMG_1598
Date: 06/08/2004
Views: 6618
|
|
|
|
Pre-made harness 2.
Date: 03/26/2009
Views: 5065
|
|
|
P1030539
Date: 09/12/2009
Views: 6561
|
|
|
|
IMG_0084post
Date: 09/02/2010
Views: 3966
|
|
|
DSCN4667small
Date: 08/27/2006
Views: 4738
|
|
|
|
49_TP_ruff_cutout
Date: 12/31/1969
Views: 2654
|
|
|
DSCN8305
Date: 09/18/2010
Views: 5700
|
|
|
|
IMG_1549
Date: 06/07/2004
Views: 4318
|
|
|
CIMG0039
Date: 08/09/2005
Views: 5791
|
|
|
|
IM003593
Date: 11/18/2007
Views: 5355
|
|
|
dsc09066
Port side peel ply removed. Oh notice the caps in the sockets. What I did was take a block of foam and push it down in the socket, then took it back out and covered it with car wax. Once all the ribs are in I'll see how it worked.
Date: 01/25/2013
Views: 19459
|
|
|
|
Spar ramp 2.
Date: 10/31/2010
Views: 6031
|
|
|
IMG_0721
Date: 10/31/2005
Views: 4764
|
|
|
|
Noise_2
Date: 03/07/2009
Views: 5029
|
|
|
IMG_1238ann
The vent port was reversed from the original regulator. This one points forward. Had to do some tugging on tubing to get it all arranged. As soon as I have my new brake caliper installed and tested, I'll be ready to start testing the engine.
Date: 06/21/2010
Views: 4475
|
|
|
|
IMG_8247Ann
Date: 07/21/2008
Views: 4257
|
|
|
Photo0013
Date: 10/12/2009
Views: 4716
|
|
|
|
Blurry but you can see "hangman" hanging out.
Date: 02/18/2012
Views: 6831
|
|
|
IMG_2490
Date: 04/05/2006
Views: 4825
|
|
