|
DSCF0065
Date: 07/15/2009
Views: 2706
|
|
|
DSCN6648
Date: 10/25/2009
Views: 2377
|
|
|
Flugzeugabsturz_22_08_2008_Marchtrenk_010
Date: 08/22/2008
Views: 3728
|
|
|
Raimo 4
Date: 05/28/2007
Views: 3139
|
|
|
IM003631
Date: 11/24/2007
Views: 3243
|
|
|
IMG_5257
Date: 02/04/2013
Views: 4162
|
|
|
Monarch lathe.
Date: 07/24/2003
Views: 8329
|
|
|
IMG_2685
I elected to make up a support structure from some 12" 1 1/2 x 1 1/2 wide aluminum angle i had in my aluminum bin. Cut two lengths 5 1/2" long and clamped them to the base well centered and drilled out holes matching the base. Attached them t
Date: 04/09/2012
Views: 2846
|
|
|
20050219_IMG_0020
Date: 02/19/2005
Views: 2475
|
|
|
IMG_0001_001
Date: 05/06/2007
Views: 3903
|
|
|
DSCN3848
Date: 07/01/2005
Views: 2713
|
|
|
IMG_0332
Date: 04/19/2005
Views: 3134
|
|
|
Y10-06-28 treat 1.
Date: 06/28/2010
Views: 3708
|
|
|
A062403_Cockpit
Date: 12/31/1969
Views: 3339
|
|
|
061602_Stiffener_jpg
Date: 12/31/1969
Views: 2573
|
|
|
Bonding Port lift pin sockets 14.
Date: 10/28/2010
Views: 3031
|
|
|
IMG_0912post
After much flailing about which shall not be documented here, I went back to the double puck brake and spent a couple days trying to bleed the new system. Without much luck. I called Robby at Grove Aircraft and he pointed out that if there were any high
Date: 07/01/2010
Views: 3039
|
|
|
Spar clamp that allows a little fore and aft movement
Date: 11/27/2013
Views: 4731
|
|
|
NewSandersAnn
Date: 09/27/2004
Views: 3393
|
|
|
IMG_2335
Date: 07/11/2005
Views: 3132
|
|