|
|
DSCN4717Ann
Date: 09/03/2006
Views: 5557
|
|
|
IMG_2528
View from the other side. Must have down 5 test fit by the last one. Each resulted in finding things to correct. So I've been correcting things for a couple weeks now. More wire labels, adding connectors, checking pinouts, testing switches, finding is
Date: 01/14/2012
Views: 6034
|
|
|
|
DSCF0036
Date: 03/02/2009
Views: 6298
|
|
|
Cliff Shaw 2
Date: 05/24/2009
Views: 4778
|
|
|
|
IMG_2387
Date: 08/14/2005
Views: 6930
|
|
|
New MC-4A 07
Now we need mounting brackets. 1 1/4x1 1/4x1/8 aluminum angle has been cut to length (5 1/4 in) and is positioned on the brake mount for drilling the mounting holes using a wood block and clamp.
Date: 04/14/2012
Views: 4661
|
|
|
|
Bonding_Windows
Date: 12/31/1969
Views: 9016
|
|
|
Top fuse fit 3.
Date: 03/22/2009
Views: 10557
|
|
|
|
DSCN6560
Date: 10/25/2009
Views: 4521
|
|
|
dsc08634
OK now that the plane is off the trailer and on its own wheel we were able to remove most of the trailer hardware and position the ribs. We also used the main bolts to hold the first rib in place. The other rib was left a little lower to be located once
Date: 04/15/2012
Views: 20487
|
|
|
|
110_1016_IMG
Date: 02/15/2004
Views: 8517
|
|
|
Servo1
Date: 11/26/2008
Views: 4894
|
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 21466
|
|
|
Black_Sea_Trip_058
Date: 08/25/2008
Views: 7580
|
|
|
|
CH26_3
Date: 12/30/2005
Views: 5107
|
|
|
IM003039
Date: 10/29/2007
Views: 7167
|
|
|
|
DSC_0240
Date: 09/21/2007
Views: 7993
|
|
|
P9010168
Date: 09/01/2007
Views: 6909
|
|
|
|
Tailplane_13
Date: 01/23/2006
Views: 4774
|
|
|
MG_2920
Date: 03/17/2008
Views: 4667
|
|
