|
|
IMG_7719Ann
Date: 06/07/2008
Views: 5797
|
|
|
2005_DSCF0121
Date: 02/04/2009
Views: 3782
|
|
|
|
DSC00080_Texted
Date: 12/31/1969
Views: 4737
|
|
|
cliff7
Date: 12/31/1969
Views: 6960
|
|
|
|
Mod 40
Date: 08/26/2010
Views: 5242
|
|
|
Rudder_stops_11
Date: 05/26/2009
Views: 6381
|
|
|
|
IMG_1280ann
Poly has been taped over the front half. This will prevent the interior layup from sticking to the front half forming the joining flange. The front and rear have been taped together in preparation for the inner layup.
Date: 03/29/2011
Views: 4608
|
|
|
IMG_1345ann
Used a big AN970 washer with an elastic stop nut to hold it all in place.
Date: 11/05/2010
Views: 4228
|
|
|
|
EGTSensor02Ann
Date: 05/25/2004
Views: 4083
|
|
|
IMG_0084post
Date: 09/02/2010
Views: 4269
|
|
|
|
Tie-bar 31.
Date: 11/17/2010
Views: 5838
|
|
|
081602_door_handles
Date: 12/31/1969
Views: 4929
|
|
|
|
DSC00293
Date: 12/31/1969
Views: 5528
|
|
|
IM003674
Date: 11/28/2007
Views: 6480
|
|
|
|
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle cent
Date: 01/23/2013
Views: 19724
|
|
|
IMG_6200post
Date: 08/09/2009
Views: 4743
|
|
|
|
DSCF0028_002
Date: 09/08/2009
Views: 7949
|
|
|
DSCN6432
Date: 10/24/2009
Views: 9512
|
|
|
|
CBM33T brake-system-toe-brakes-march2013
Date: 11/18/2013
Views: 4332
|
|
|
CH9S_11
Date: 12/31/1969
Views: 6882
|
|
