|
|
109_0918_IMG
Date: 01/06/2004
Views: 5864
|
|
|
IMG_0303post
Date: 09/18/2010
Views: 6269
|
|
|
|
WingSetC04Ann
Date: 08/09/2004
Views: 4155
|
|
|
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle cent
Date: 01/23/2013
Views: 19724
|
|
|
|
DoorMount10Ann
Date: 07/04/2004
Views: 3587
|
|
|
24_04_08_vliegfoto_s_025
Date: 04/26/2008
Views: 3743
|
|
|
|
Shackle_Adj_on_Balance_Wt_Arm
Date: 09/02/2004
Views: 6145
|
|
|
Main_Landing_Gear_10
Date: 07/01/2007
Views: 5256
|
|
|
|
IMG_1471p
Removed the backing paper and carefully pressed the new X down. Then VERY carefully pulled the release paper off the front, ensuring the X was fully adhered.
Date: 06/07/2011
Views: 4805
|
|
|
IMG_6654Ann
Date: 02/14/2008
Views: 3730
|
|
|
|
L1010185
Date: 03/17/2008
Views: 5569
|
|
|
Blurry but you can see "hangman" hanging out.
Date: 02/18/2012
Views: 8327
|
|
|
|
IMG_5333
Date: 04/24/2013
Views: 6629
|
|
|
Top fit 10.
Date: 04/05/2009
Views: 5769
|
|
|
|
RudderMount10Ann
Date: 06/14/2004
Views: 4933
|
|
|
DSCN8228
Date: 09/18/2010
Views: 6257
|
|
|
|
CH18_05
Date: 12/31/1969
Views: 4665
|
|
|
IMG_1693
Date: 06/12/2010
Views: 6754
|
|
|
|
Control_Systems_53
Date: 01/23/2006
Views: 4597
|
|
|
Tailplane_80
Date: 01/23/2006
Views: 3833
|
|
