|
|
Making awful fit of lift pads correct 10.
Date: 10/12/2010
Views: 6064
|
|
|
Upholstery 4
Date: 03/05/2018
Views: 8373
|
|
|
|
Fuze_fill_3
Date: 05/21/2009
Views: 6604
|
|
|
dscn0729
Date: 12/31/1969
Views: 3585
|
|
|
|
IMG_6605Ann
Date: 01/20/2008
Views: 7719
|
|
|
IMG_1668_001
Date: 06/23/2004
Views: 6513
|
|
|
|
TailplaneFit00
Date: 01/21/2004
Views: 6981
|
|
|
IMG_1124_001
Date: 03/19/2004
Views: 6190
|
|
|
|
Mod69_04
Date: 06/18/2005
Views: 5102
|
|
|
IMG_1086ann
Back in early April I attempted to bolt the new Billet Pump onto the gearbox. Problem #1 - It didn't fit the boss on the gearbox. It hit a raised area at the edge of the boss.
Date: 04/03/2010
Views: 5901
|
|
|
|
IMG_7543ann
The final result. The banjo hose end bolts nicely to the brake. With any luck, I'll take the brake back to the airport after work tomorrow and reinstall it all and see if I can bleed the brakes.
Date: 04/18/2010
Views: 5062
|
|
|
Ron Paint
Date: 10/29/2007
Views: 7530
|
|
|
|
Broken edge of starboard aileron 6.
Date: 09/28/2010
Views: 8822
|
|
|
DSCN6298
Date: 10/11/2009
Views: 6219
|
|
|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 4463
|
|
|
DSC00094_Texted
Date: 12/31/1969
Views: 4856
|
|
|
|
DSCF0013
Date: 08/03/2009
Views: 5501
|
|
|
IMGA0623
Date: 04/09/2013
Views: 70864
|
|
|
|
DSCN5046Ann
Date: 12/12/2006
Views: 4395
|
|
|
IMG_1087ann
Then problem #2 - bolts that held the cover plate in place wouldn't fit into the space provided on the pump.
Date: 04/03/2010
Views: 5666
|
|
