|
|
a042703_sIDE_VIEW
Date: 12/31/1969
Views: 4573
|
|
|
DSCN5526Ann
Date: 02/19/2007
Views: 4703
|
|
|
|
IMG_2511
Date: 04/25/2006
Views: 5431
|
|
|
IMG_0110post
Date: 09/03/2010
Views: 4609
|
|
|
|
DSCN5003Ann
Date: 12/06/2006
Views: 3877
|
|
|
Bud's MG Mod 78 socket idea Y13-07-08
Date: 07/09/2013
Views: 18792
|
|
|
|
dscn2738
Date: 12/31/1969
Views: 3500
|
|
|
Strobererer_4
Date: 05/18/2009
Views: 5871
|
|
|
|
Running and connecting "Fat" wires 2.
Date: 01/05/2011
Views: 6423
|
|
|
DSCN3461
Date: 12/31/1969
Views: 3623
|
|
|
|
20040216204346_G
Date: 12/31/1969
Views: 4375
|
|
|
IMG_2289
Date: 03/15/2005
Views: 5429
|
|
|
|
DSCN4386Ann
Date: 05/28/2006
Views: 4674
|
|
|
DVR_schematic_4
Date: 04/11/2009
Views: 6989
|
|
|
|
DSC02095
Date: 11/04/2009
Views: 5344
|
|
|
dsc08642
From the start the airframe was sitting 2.5 deg tail low and 0.1 deg to port. Not bad for just putting her on there. I jacked up the back of the trailer to get it as near to 0.0 as possible and also shifted the airframe latterly to turn that .1 to 0.0 a
Date: 04/15/2012
Views: 27345
|
|
|
|
Sternpost08Ann
Date: 06/14/2004
Views: 3678
|
|
|
DSCN5212
Date: 11/29/1999
Views: 4562
|
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 160424
|
|
|
Lead to hold flat after heating.
Date: 01/11/2010
Views: 7595
|
|
