|
|
IMG_1238ann
The vent port was reversed from the original regulator. This one points forward. Had to do some tugging on tubing to get it all arranged. As soon as I have my new brake caliper installed and tested, I'll be ready to start testing the engine.
Date: 06/21/2010
Views: 6208
|
|
|
Sealed_001
Date: 10/25/2008
Views: 7054
|
|
|
|
Lower horizontal done 5.
Date: 05/07/2009
Views: 6338
|
|
|
IMG_1412
Another issue with the pre-built cockpit module. The fuel tank was not supported on the aluminum angle. Bud suggested this could cause tank cracking and recommended some sort of support be added. I cut a wedge from a length of balsa and covered it with
Date: 05/28/2011
Views: 6229
|
|
|
|
DSCN3216
Date: 12/31/1969
Views: 5116
|
|
|
Door hinge rebates 44.
Date: 11/10/2009
Views: 6621
|
|
|
|
IMG_0334
Date: 04/19/2005
Views: 6942
|
|
|
Caernarfon_EGCK_Noth_Wales
Date: 04/21/2009
Views: 5222
|
|
|
|
dscn0804
Date: 12/31/1969
Views: 3933
|
|
|
IMG_2310
Date: 05/24/2005
Views: 6836
|
|
|
|
Headrest_3
Date: 02/27/2009
Views: 7648
|
|
|
Main fuse and switched fuse buses.
Date: 01/21/2003
Views: 12071
|
|
|
|
IMG_0261
Date: 04/16/2005
Views: 7049
|
|
|
IMG_5730Ann
Date: 10/21/2007
Views: 4853
|
|
|
|
P1010041
Date: 11/29/1999
Views: 7719
|
|
|
HeadlinerFit06Ann
Date: 05/30/2005
Views: 4177
|
|
|
|
Oshkosh_2009_088
Date: 08/02/2009
Views: 12271
|
|
|
digitrak2_Texted
Date: 12/31/1969
Views: 4798
|
|
|
|
Dan Bish stainless brake hose and fittings.
Date: 06/22/2009
Views: 4766
|
|
|
smDSCN1817
Date: 12/31/1969
Views: 8099
|
|
