|
|
IMG_1412
Another issue with the pre-built cockpit module. The fuel tank was not supported on the aluminum angle. Bud suggested this could cause tank cracking and recommended some sort of support be added. I cut a wedge from a length of balsa and covered it with
Date: 05/28/2011
Views: 5589
|
|
|
12122010512
Date: 12/12/2010
Views: 6001
|
|
|
|
Control_Systems_65_24
Date: 06/03/2007
Views: 3783
|
|
|
Duxford_17_8_09_158
Date: 08/23/2009
Views: 4086
|
|
|
|
Fuel_System_15
Date: 01/23/2006
Views: 3593
|
|
|
IMG_6624post
Date: 09/24/2009
Views: 5444
|
|
|
|
Revised schematic adressing prop 3.
Date: 06/08/2010
Views: 6786
|
|
|
imm010_11
Date: 09/03/2009
Views: 5490
|
|
|
|
IMG_3374em
Run the engine, check the pressures. All seems OK. 5 lbs into the regulator and 3.8 lbs out of the regulator. This is with the Billet mechanical pump. Which became the next source of concern.
Date: 07/04/2012
Views: 5398
|
|
|
IMG_8157Ann
Date: 07/13/2008
Views: 4282
|
|
|
|
DSC00463
Date: 04/06/2010
Views: 7014
|
|
|
Wings on 3
Just had to get all the pitot/static lines and wing lighting wiring tucked into the wing root properly or they don't fit.
Date: 07/01/2011
Views: 5411
|
|
|
|
DSCN5750Ann
Date: 04/19/2007
Views: 4542
|
|
|
Mod_70_11
Date: 04/15/2006
Views: 6301
|
|
|
|
image016
Date: 01/21/2009
Views: 5568
|
|
|
img0248copy
Date: 07/29/2007
Views: 11872
|
|
|
|
Fill and sand 2.
Date: 12/28/2010
Views: 5913
|
|
|
DSCN5171
Date: 11/29/1999
Views: 5670
|
|
|
|
Nice fit.
Date: 01/17/2010
Views: 7124
|
|
|
IMG_0457ann
2010 10 20 While in Florida, I had Bud go over the aircraft to see what issues he could find. One issue was the lack of spar pin reinforcements when the cockpit module was built.
Date: 10/20/2010
Views: 4465
|
|
