|
DSCN4384
Date: 03/26/2009
Views: 3211
|
|
|
DSCN6715
Date: 10/25/2009
Views: 3947
|
|
|
IM003683
Date: 12/02/2007
Views: 4223
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 12735
|
|
|
2006SnF064
Date: 04/07/2006
Views: 3524
|
|
|
2_snaps
When the tab on the back of the pilot cushion was pulled to remove it, the snap bases pulled through the screw head and remained in the snaps. You should be able to see the snap bases in the snaps in this picture.
Date: 06/23/2011
Views: 4185
|
|
|
IMG_2435Ann
Date: 11/09/2008
Views: 2939
|
|
|
110502_Lwercowl
Date: 01/17/2006
Views: 4461
|
|
|
Ant_srvo_5
Date: 06/03/2009
Views: 3595
|
|
|
FuelFilterSpring00
Date: 04/06/2004
Views: 3040
|
|
|
N531RP_1_Y9_06_07
Date: 06/07/2009
Views: 3356
|
|
|
IMG_2845Ann
Date: 11/29/2008
Views: 2716
|
|
|
Stall_warner_4
Date: 03/06/2009
Views: 4332
|
|
|
Third access cover 2.
Date: 05/02/2009
Views: 2824
|
|
|
IMG_7269post
Date: 02/21/2010
Views: 3220
|
|
|
IMG_2853Ann
Date: 11/30/2008
Views: 2575
|
|
|
N4211W wing rigging 13.
Date: 10/09/2010
Views: 3015
|
|
|
IMG_0919post
Some pics after the engine run-up and taxi tests today.
Date: 07/01/2010
Views: 2786
|
|
|
DSCN5092
Date: 11/29/1999
Views: 5316
|
|
|
IM003596
Date: 11/18/2007
Views: 3140
|
|