|
CIMG0038
Date: 08/08/2005
Views: 6383
|
|
|
DSCF0059
Date: 10/27/2009
Views: 3725
|
|
|
Mike Parkin brake banjo.
Date: 06/23/2009
Views: 6089
|
|
|
DSCN8346
Date: 09/19/2010
Views: 3007
|
|
|
Bud 6.
Date: 02/17/2010
Views: 3217
|
|
|
DSCN5038Ann
Date: 12/12/2006
Views: 2464
|
|
|
RudderMount06Ann
Date: 06/10/2004
Views: 2356
|
|
|
Door hinge rebates 37.
Date: 11/06/2009
Views: 2374
|
|
|
DSCN5749Ann
Date: 04/19/2007
Views: 3047
|
|
|
Bonding of Starboard lift pin sockets 13.
Date: 10/19/2010
Views: 3868
|
|
|
imm001_2A
Date: 09/02/2009
Views: 3908
|
|
|
IMG_7230
It was determined that a 1/4 in (6.4 mm) thick piece of rigid urethane foam topped with cork was needed to support the front "ledge" of the tank so it wouldn't sag.
Date: 01/26/2014
Views: 5858
|
|
|
06032003230754_G
Date: 12/31/1969
Views: 2490
|
|
|
Front Cable Mount with Lever in Down Position
Date: 12/12/2013
Views: 3634
|
|
|
21082003203903_G
Date: 12/31/1969
Views: 2736
|
|
|
dsc09035
Rib one after cure of 420 and peel ply removed. Think we used 112g of 420 here due to the odd angle.
Date: 01/23/2013
Views: 6947
|
|
|
Control_Systems_5_001
Date: 05/19/2008
Views: 4848
|
|
|
IMG_3301post
The issue being the softness and flexibility of the gasket material. Makes it difficult to ensure proper location while reattaching the bowl. The gasket is probably fine for a carb rebuild where you are doing it on the bench and can turn the carb over f
Date: 06/01/2012
Views: 3861
|
|
|
DSCN5530Ann
Date: 02/18/2007
Views: 2827
|
|
|
IMG_8054Ann
Date: 07/05/2008
Views: 2868
|
|