|
|
IMG_6120Post
Date: 08/09/2009
Views: 4049
|
|
|
IMG_0021
Date: 07/16/2006
Views: 5762
|
|
|
|
IMG_0281ann
Date: 03/16/2009
Views: 4888
|
|
|
DSCN6578
Date: 10/25/2009
Views: 3655
|
|
|
|
Photo0013
Date: 10/12/2009
Views: 4761
|
|
|
Landing_Gear_33
Date: 01/23/2006
Views: 3621
|
|
|
|
34_G
Date: 06/19/2009
Views: 4497
|
|
|
LGLever08
Date: 02/09/2004
Views: 3746
|
|
|
|
Fin cap 26.
Date: 03/21/2009
Views: 5062
|
|
|
IMG_7539ann
Realizing that I'd need to do any remaining work at home, I removed the disk brake, gathered up the bits and headed for the shop. This is just a pic of the BSPT threaded hole in the disk brake. Had to clean it out as it was full of crap. Testing showed
Date: 04/18/2010
Views: 4200
|
|
|
|
DSC00691_Texted
Date: 12/31/1969
Views: 16718
|
|
|
dscn2174
Date: 12/31/1969
Views: 4067
|
|
|
|
Middle fin rib complete 1.
Date: 04/27/2009
Views: 4545
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 18165
|
|
|
|
dsc09047
I took cardboard and bent it around the socket and overlapped per the manual. Then took this cardboard and made a new template for cutouts. This made the layups go really quick.
Date: 01/23/2013
Views: 18589
|
|
|
IMG_1739
Date: 07/12/2004
Views: 4799
|
|
|
|
DoorSupportMod08Ann
Date: 05/05/2004
Views: 2955
|
|
|
20050214_IMG_0010
Date: 02/14/2005
Views: 3962
|
|
|
|
24_04_08_vliegfoto_s_063
Date: 04/26/2008
Views: 3296
|
|
|
DSCF0030_001
Date: 07/15/2009
Views: 13156
|
|
