|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 20924
|
|
|
Internal_Sheeting_Incomplete
Date: 09/03/2004
Views: 6856
|
|
|
|
DSCF0002
Date: 06/28/2009
Views: 8829
|
|
|
IMG_2291
Date: 03/15/2005
Views: 5257
|
|
|
|
IM000441
Date: 10/29/2007
Views: 4890
|
|
|
dscn2025
Date: 12/31/1969
Views: 4254
|
|
|
|
SLOWA!
Date: 02/16/2010
Views: 10481
|
|
|
IMG_7378ann
2010 03 07 - Spent Saturday working on the new brake master cylinder from MDO in France. I have it about 75% installed. Ran into some hardware issues which are shown in later pics. This pic is an overview of the new master cylinder installed on the con
Date: 03/07/2010
Views: 4293
|
|
|
|
DSCN5479Ann
Date: 01/20/2007
Views: 4786
|
|
|
20141102_154504
Cut old fuel lines. Gona have to replace them anyways. Now I just need to remove the stop block where the gear handle went.
Date: 11/02/2014
Views: 39181
|
|
|
|
IMG_4822
Date: 07/02/2012
Views: 10925
|
|
|
IMG_2409
Date: 09/21/2005
Views: 4983
|
|
|
|
IMG_0201
Date: 04/14/2005
Views: 3756
|
|
|
P4300016
Date: 04/30/2005
Views: 5196
|
|
|
|
Ruddder_3
Date: 05/21/2009
Views: 6762
|
|
|
DSCF0100
Date: 06/22/2009
Views: 4176
|
|
|
|
Stick selector panel mounting 4.
Date: 08/08/2010
Views: 5197
|
|
|
first_flight_5
Date: 07/19/2007
Views: 3806
|
|
|
|
010325_025
Date: 12/31/1969
Views: 4612
|
|
|
Wing_Rigging_No10
Date: 09/02/2004
Views: 4929
|
|
