|
|
108_0829_IMG
Date: 10/15/2003
Views: 6816
|
|
|
IMG_6962
Old 1/4 in (6.4 mm) vent on the top. Totally inadequate for the job. New 3/8 in (9.5 mm) vent on the bottom.
Date: 11/13/2013
Views: 9387
|
|
|
|
TrimPortDoor02
Date: 09/16/2004
Views: 3310
|
|
|
Seaford_VOR_SFD
Date: 07/25/2009
Views: 5442
|
|
|
|
G-IVER5
Date: 05/03/2009
Views: 7094
|
|
|
MG_2882
Date: 03/17/2008
Views: 6056
|
|
|
|
Autopilot_31
Date: 05/19/2008
Views: 5408
|
|
|
DSCF0675
Date: 07/31/2003
Views: 16838
|
|
|
|
Port front spacer complete and held in place with double sticky tape.
Date: 10/12/2009
Views: 5363
|
|
|
DSCN6020Ann
Date: 05/06/2007
Views: 4545
|
|
|
|
Lower door anti-bulge 14.
Date: 12/01/2009
Views: 5850
|
|
|
Flap Upstops 7 of 7
Date: 12/25/2013
Views: 9612
|
|
|
|
DSC00063
Date: 12/31/1969
Views: 6526
|
|
|
SIMG1867
Date: 11/29/2001
Views: 9542
|
|
|
|
IM001407
Date: 10/30/2007
Views: 7663
|
|
|
PortWingCoverStart04
Date: 10/29/2003
Views: 5527
|
|
|
|
Torque tube pin options.
Date: 02/26/2011
Views: 6557
|
|
|
dscn0790
Date: 12/31/1969
Views: 4299
|
|
|
|
IMG_0005
Date: 05/06/2007
Views: 8257
|
|
|
IMG_2601
I took the float bowl off the starboard carb and removed the old gasket. The instructions with the new nitrile gasket said to apply some grease to hold the gasket in place while the bowl was replaced. I didn't have any grease but I had some light oil wh
Date: 05/30/2012
Views: 4891
|
|
