|
|
IMG_2685
I elected to make up a support structure from some 12" 1 1/2 x 1 1/2 wide aluminum angle i had in my aluminum bin. Cut two lengths 5 1/2" long and clamped them to the base well centered and drilled out holes matching the base. Attached them t
Date: 04/09/2012
Views: 5034
|
|
|
DSCF0605
Date: 07/25/2003
Views: 6913
|
|
|
|
Seamed 4.
Date: 04/03/2009
Views: 6574
|
|
|
dscn0899
Date: 12/31/1969
Views: 4493
|
|
|
|
IMG_4592
Date: 05/01/2012
Views: 8453
|
|
|
Dan Bish's port wing.
Date: 06/12/2006
Views: 8089
|
|
|
|
DSCN5753Ann
Date: 04/20/2007
Views: 4908
|
|
|
Tank_Fitting
Date: 03/03/2004
Views: 5776
|
|
|
|
IMG_6977
The white stuff you see is low-expansion foam that was squirted in to provide support so this wouldn't happen. Unfortunately, I could not get foam under the port side sufficiently to support that side. That's where the crack developed.
Date: 10/19/2013
Views: 10333
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 21753
|
|
|
|
Starboard bracket mount on top of footwell.
Date: 01/25/2010
Views: 6901
|
|
|
Port wing 19.
Date: 09/15/2009
Views: 5541
|
|
|
|
Main wing bushings Bud
Date: 01/30/2011
Views: 4045
|
|
|
MG_1482
Date: 07/09/2006
Views: 6326
|
|
|
|
052302_firewall2
Date: 12/31/1969
Views: 4649
|
|
|
Stab_profile_2
Date: 07/12/2009
Views: 8767
|
|
|
|
Gunson Gastester G4125.
Date: 03/11/2010
Views: 5140
|
|
|
Control_Systems_37
Date: 01/23/2006
Views: 3794
|
|
|
|
U2
Date: 10/26/2008
Views: 7487
|
|
|
DoorRearDoorLatchLights03Ann
Date: 08/13/2005
Views: 3599
|
|
