|
|
Starboard and Port Bucket 3 of 4.
Date: 08/06/2003
Views: 14563
|
|
|
DSCN4353Ann
Date: 04/30/2006
Views: 4102
|
|
|
|
IMG_6977post
Width of ramp to trimmed corner
Date: 12/27/2009
Views: 6502
|
|
|
DSCN6230
Date: 10/11/2009
Views: 5786
|
|
|
|
Ruudr_4
Date: 05/22/2009
Views: 6694
|
|
|
DSCN6582
Date: 10/25/2009
Views: 4619
|
|
|
|
IMG_6661
Date: 06/08/2017
Views: 11304
|
|
|
IMG_6442ann
Date: 08/02/2009
Views: 4587
|
|
|
|
IMG_2856
Date: 12/03/2008
Views: 5560
|
|
|
DSCN4992Ann
Date: 12/05/2006
Views: 4717
|
|
|
|
IMG_0755
Date: 11/11/2005
Views: 4763
|
|
|
Europa_093
Date: 10/30/2007
Views: 7184
|
|
|
|
Fuel_System_15
Date: 01/23/2006
Views: 3680
|
|
|
IMG_2454
I had some maple veneer from another project which came in handy to cover the sheet aluminum plates. I think it's much more attractive than painted aluminum.
Date: 10/24/2011
Views: 5504
|
|
|
|
11072002125450_G
Date: 12/31/1969
Views: 4757
|
|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 4457
|
|
|
|
TrimSwitch01Ann
Date: 12/02/2005
Views: 3777
|
|
|
DSCN4991Ann
Date: 12/05/2006
Views: 4401
|
|
|
|
IMG_6477post
Date: 09/07/2009
Views: 6608
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 66912
|
|
