|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 4808
|
|
|
IMG_1241ann
2011 03 25 Test fit of the wheel pant mounting bracket. (2nd try, BTW) This one is OK.
Date: 03/25/2011
Views: 4492
|
|
|
|
Starboard wing 30.
Date: 06/16/2009
Views: 6869
|
|
|
Making awful fit of lift pads correct 30.
Date: 10/15/2010
Views: 5958
|
|
|
|
DSC01555_Texted_001
Date: 12/31/1969
Views: 5714
|
|
|
DoorSupportMod29Ann
Date: 02/05/2006
Views: 3944
|
|
|
|
Upholstery 2
First step is to do everything around the instrument module where it will be difficult to get at once it is installed. Finish of the plane is critical since no matter how well built, the finish is wahta you will be looking at the rest of your flying life.
Date: 03/05/2018
Views: 9405
|
|
|
DSCN8248
Date: 09/18/2010
Views: 7304
|
|
|
|
DSCN5759Ann
Date: 04/20/2007
Views: 4728
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 93911
|
|
|
|
DSC00212
Marking position for bracket on rear bulk head
Date: 09/08/2015
Views: 101683
|
|
|
Starboard wing complete 2.
Date: 09/15/2009
Views: 6282
|
|
|
|
N4211W wing rigging 21.
Date: 10/09/2010
Views: 6017
|
|
|
FuelSystemMod31
Date: 04/15/2004
Views: 4751
|
|
|
|
IMG_0992
Date: 08/09/2007
Views: 4832
|
|
|
DSC_0273
Date: 05/15/2008
Views: 5366
|
|
|
|
05_G
Date: 06/19/2009
Views: 4200
|
|
|
IMG_0334
Date: 04/19/2005
Views: 6920
|
|
|
|
FlapDrive17Ann
Date: 08/15/2004
Views: 3867
|
|
|
DSCN5291Ann
Date: 12/21/2006
Views: 5152
|
|
