|
|
CH16_1
Date: 12/31/1969
Views: 17899
|
|
|
DSCN5433
Date: 07/20/2009
Views: 6574
|
|
|
|
69_throttle_lever
Date: 12/31/1969
Views: 3740
|
|
|
ceri_two
Date: 12/31/1969
Views: 6952
|
|
|
|
InstrumentPanel105Ann
Date: 12/26/2005
Views: 4430
|
|
|
DSCN3121
Date: 09/11/2009
Views: 9811
|
|
|
|
Stick grip 7
Date: 03/22/2009
Views: 6274
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 171838
|
|
|
|
2006SnF052
Date: 04/07/2006
Views: 5497
|
|
|
DSCN5260Ann
Date: 12/17/2006
Views: 4692
|
|
|
|
DSCF0014
Date: 01/19/2010
Views: 7458
|
|
|
Bucket clamp 2 of 3.
Date: 08/06/2003
Views: 9135
|
|
|
|
DSCN6356
Date: 10/11/2009
Views: 5582
|
|
|
IMG_0758
Date: 11/11/2005
Views: 5801
|
|
|
|
Fuselage_07_001
Date: 06/09/2007
Views: 5719
|
|
|
DSC_0042
Date: 06/24/2007
Views: 4571
|
|
|
|
Door sill conduit run 25.
Date: 08/14/2010
Views: 7056
|
|
|
Tailplane_43
Date: 01/23/2006
Views: 4227
|
|
|
|
CH11_cradle3
Date: 12/31/1969
Views: 5434
|
|
|
dsc09024
I was really anal about keeping the socket holes tight. This proved to be more work than it was worth and was fighting the tight fit when it came to locating the axles. Do yourself a favor and just make them a little bigger, 1/8 or so. This gap will be
Date: 01/22/2013
Views: 20840
|
|
