|
|
DSC00081_Texted
Date: 12/31/1969
Views: 4843
|
|
|
Top fuse fit 2.
Date: 03/22/2009
Views: 7774
|
|
|
|
IMG_0273
Date: 04/16/2005
Views: 4173
|
|
|
18102008204
Date: 10/18/2008
Views: 5991
|
|
|
|
Rotax_914F_1
Date: 01/23/2006
Views: 11300
|
|
|
IMG_0683
Date: 10/28/2005
Views: 5074
|
|
|
|
IMG_0874post
Finally, back underneath to find the old drops on the cross tube and there was the tell-tale residue of evaporated coolant on the intake to the coolant pump (Green arrow). Shut things down. Found the longest screwdriver I had and was able to reach the c
Date: 01/24/2010
Views: 5021
|
|
|
46_G
Date: 06/19/2009
Views: 4107
|
|
|
|
WingSet98Ann
Date: 08/06/2004
Views: 3310
|
|
|
IMG_2365
Date: 08/07/2005
Views: 7882
|
|
|
|
DSCN8258
Date: 09/18/2010
Views: 5434
|
|
|
Port wing 8.
Date: 09/15/2009
Views: 4520
|
|
|
|
dscn1013
Date: 12/31/1969
Views: 3719
|
|
|
Fuse seam 4.
Date: 04/02/2009
Views: 5059
|
|
|
|
Bonding Port lift pin sockets 8.
Date: 10/28/2010
Views: 4691
|
|
|
010325_030
Date: 12/31/1969
Views: 3915
|
|
|
|
29062002203213_G
Date: 12/31/1969
Views: 3967
|
|
|
010323_002
Date: 12/31/1969
Views: 4510
|
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 154975
|
|
|
CH19_7
Date: 12/31/1969
Views: 5384
|
|
