Second and final pass of Port top wingskin bond on 10.
Date: 09/13/2010
Views: 5175
DSCN5167
Date: 11/29/1999
Views: 5420
Newest Image
EAA SITE
Date: 08/23/2023
Views: 769061
Most Viewed Image
EAA SITE
Date: 08/23/2023
Views: 769061
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing moved.
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing moved.