Login
EuropaOwners Random Items Mill round slot in master cylinder 10 of 12
Advanced Search
View Slideshow (Fullscreen)

Random Images

21082003203345_G

21082003203345_G

Date: 12/31/1969 Views: 4103

110_1036_IMG_001

110_1036_IMG_001

Date: 02/22/2004 Views: 6056

Ruud_5

Ruud_5

Date: 05/31/2009 Views: 4985

Newest Image

EAA SITE

EAA SITE

Date: 08/23/2023 Views: 693519

Most Viewed Image

EAA SITE

EAA SITE

Date: 08/23/2023 Views: 693519

Mill round slot in master cylinder 10 of 12

I used 400 grit on the aluminium mandrel, then carefully finished with a mini piece of 600 grit wet dry sandpaper.

The other portions turned on this mandrel are not important, it was just something I had laying around.

The rest of the bores anodizing was left untouched except for the first ~ .125".

I made the mandrel ~ .125" deep at first, but found out it was not deep enough because of the bores chamfer. I then made it ~ .1875" deep which gave me ~ .125" on the bore.

Y13-12-23

Date: 12/23/2013
Size:
Full size: 4896x3672
Mill round slot in master cylinder 10 of 12

Photo Properties

summary  details
Make SONY Model DSC-HX20V
Aperture Value f/3.2 Color Space sRGB
Exposure Bias Value 0 EV Exposure Program Program
Flash No Flash Focal Length 4.45 mm
ISO 800 Metering Mode Multi-Segment
Shutter Speed Value 1/60 sec Date/Time Mon 23 Dec 2013 04:36:31 PM UTC
Powered by Gallery v2.3