InstrumentPanel35Ann

A leftover length of aluminum angle (from the failed canopy support arm mod) was cut to length to match the instrument panel ground buss. Using the buss as a template, two holes were drilled to allow the buss to attach to the aluminum angle. Two more holes were drilled on the other leg of the angle to allow the angle to be attached to the firewall. The angle was attached to the firewall with AN535 screws and AN960 washers and stiffnuts on the opposite side. The buss will be attached to the angle with screws & nuts and the whole thing connected to the ground through-bolt when the suitable ring terminals arrive from ACS.