|
Paul McAlister's Door pushrod fork.
Date: 03/28/2008
Views: 12359
|
|
|
Door mechanism cover install 9.
Date: 11/17/2010
Views: 11005
|
|
|
Non drying Prussian blue close at hand.
Date: 10/08/2009
Views: 7081
|
|
|
Kingsley_Hurst_Door_Stiffening_2
Date: 10/17/2009
Views: 5388
|
|
|
Door mechanism cover install 4.
Date: 11/10/2010
Views: 4951
|
|
|
Door mechanism cover install 6.
Date: 11/14/2010
Views: 4856
|
|
|
Door mechanism cover install 5.
Date: 11/10/2010
Views: 4841
|
|
|
Found many voids and bad areas of layups on doors.
Date: 08/24/2009
Views: 4825
|
|
|
Door mechanism cover install 7.
Date: 11/14/2010
Views: 4764
|
|
|
Door mechanism cover install 8.
Date: 11/14/2010
Views: 4710
|
|
|
No problem dotting fuse, but you must careful study tip of shoot bolt.
Date: 10/08/2009
Views: 4594
|
|
|
Door Seal joint insert brake tube inside rubber Bob.
Date: 03/10/2011
Views: 4566
|
|
|
Started fitting port door.
Date: 06/26/2009
Views: 4478
|
|
|
Pin will get welded to a .080" thick plate and have 2 screws holding it in place.
Date: 12/12/2009
Views: 4437
|
|
|
Richie removing gelcoat from door rebate.
Date: 06/28/2009
Views: 4385
|
|
|
Allow 3mm glass to recess a little further.
Date: 06/26/2009
Views: 4305
|
|
|
Kingsley_Hurst_Door_Stiffening
Date: 10/17/2009
Views: 4258
|
|
|
Tiny aberration in gelcoat turns huge.
Date: 08/24/2009
Views: 4253
|
|
|
Kingsley_Hurst_Door_Stiffening_3
Date: 10/17/2009
Views: 4168
|
|
|
Had_to_trim_back_the_hinge_tang_considerably_at_this_point_in_order_to_get_full_movement
Date: 08/03/2009
Views: 4161
|
|